Test Procedure

2020-03-26
452

[仅供海外市场]

TEST PROCEDURE(graphic)

1.Read the instruction carefully before use.

2. Take out the test card and place it on a clean horizontal table.   

3.Disinfection: Use alcohol prep pad to clean one of any fingers.

4.Blood collection: Use blood lancet to puncture the finger tip and squeeze the finger to bleed. ( as shown in figure 1)

5.Use the dropper to take 20 μL of finger tip blood (about 1 drop), and add to the sample diluent tube. (as shown in figure 2 and figure 3) Shake the sample diluent tube and mix it well.

6. Use the dropper to take the diluted blood and add 3 drops to the sample hole. (as shown in figure 4 )

7.Wait 10 minutes and read result immediately. The results are invalid for more than 15 minutes.

采血针1.png 吸管2.png 稀释液3.png 滴样4.png


TEST PROCEDURE(video)




来源:
上一篇:Certificates